1. Binding material – cement,
2. Aggregate, and
Binding material: Most commonly used binding material for concrete is portland cement. Other binding materials used for this purpose, are lime, fly ash, silica fume etc. The selection of cement for concrete is depend on the “cement properties“.
Aggregate: Two types of aggregates are used in concrete. Coarse aggregate and Fine aggregate.
Coarse aggregate: Big sizes aggregates in concrete are coarse aggregates. The size of it varies between 1/2″ to 1.5″ depending on concrete mix design. Generally, crushed stone or brick chips are used as coarse aggregate.
Fine aggregate: The smaller size aggregates in concrete are Fine aggregates. The FM (Fineness Modulas) of fine aggregates can be between 1.2 to 2.5 depending on mix design. We use sand as fine aggregate in concrete.
* Properties of aggregate
Water: The most important concrete ingredient is water. Water can decrease and increase the concrete strength depending on its using. Water just starts and continues the chemical reaction of cement. High water content in concrete mix increases the workability of concrete but decreases the strength. On the contrary, low water content increase the concrete strength but makes concrete less workable.
Other than these, there are some other ingredients are used in concrete mix such as Admixture. Those are secondary ingredients and added to give concrete a certain property.
Dear readers, I try my best to keep my articles as informative as possible. And I spend hours to research. So, if this article helps you a little please share with your friends as giving me a thank.